YTA Training

Review

By

Carpentry NVQ Level 2 review

Another great 5 star carpentry NVQ l2 review has been left following the completion of the site carpentry NVQ EWPA (Experienced Worker Practical Assessment).

The EWPA is a NVQ assessment route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through a practical assessment. By using your skills acquired over the years to complete a task in our NVQ Centre (usually 1 day) which is then assessed. This qualification is the one required to attain the blue skilled worker CSCS card and gain construction site work.

David Clarke – YTA Carpentry NVQ review

I gained my carpentry nvq here at the age of 46 You really want to get your certification from here they are very professional and have a easy atmosphere the tutors are very experienced give it ago

Carpentry NVQ level 2 review

The EWPA NVQ assessor will evaluate your skills through professional discussion, witness testimonies and the practical assessment (as shown below in the two photos)

Units that make up the Site Carpentry NVQ Level 2

QCF641: Conform to general workplace safety
QCF642: Conform to efficient work practices
QCF643: Move and handle resources

Supported by THREE optional units to choose from:

QCF09: Install first fixing components
QCF10: Install second fixing components
QCF11: Erect structural carcassing components
QCF12: Maintain non-structural carpentry work
QCF628: Setting up and using transportable cutting and shaping machines in the workplace

Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment front
Carpentry NVQ level 2 assessment back
Carpentry NVQ level 2 assessment back

Are you an experienced Carpenter / Joiner of 5 or more years? then you can spend 1 day at our CITB / NOCN Cskills approved NVQ Centre in Yorkshire completing the wood occupations site carpentry NVQ level 2 EWPA (Experienced Worker Practical Assessment). We run this assessment on Saturday’s 7:30am until approx 4pm depending on your time. We run the assessment at your training centre in Bradford, West Yorkshire.

The NVQ EWPA is a route enabling an experienced worker to achieve their NVQ level 2 in their relevant trade through practical assessment. This is a fast track nvq assessment route for experienced tradespersons.

By using your skills acquired over the years to complete a task in our CITB NVQ Centre (approximately 1 day but 2 days if needed) which is then assessed it is possible to achieve the required NVQ level 2 needed to gain access to site work.

We can do this entire NVQ carpentry assessment in 1 day if you are prepared to arrive at YTA for 7:30am until finish (approx 4pm).

TOTAL COST = £900 (£750 + VAT)

*****(£450 deposit gets the assessment booked. Then, £450 on the day of the assessment)*****

Once the deposit is paid we can get you registered so you can work on site with a temporary red CSCS card)

All EWPA Times are: 07.30am – Approx. 16.00pm

NVQ EWPA’s are held every week including weekends.

Tel: 01274682199

By

Excellent Multiple Courses YTA Review.

We have received an excellent multiple courses YTA review from an ex student after completing several courses. Nigel completed Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting courses at YTA over several weeks and has since completed various projects including installing 3 bathrooms whilst renovating his properties as a landlord and is now completing his second kitchen installation. You can read his review of YTA and our tutors below:

Nigel Hammond YTA review

I attended a suite of YTA courses including Tiling, Carpentry, Plumbing, Plastering, Bricklaying and Kitchen Fitting. I was a novice, working in IT, with little more experience than the odd DIY job. I have used all the training as a landlord, renovating a few properties. I’ve installed 3 bathrooms (includes all appliances , tiling, and flooring), and I’m currently installing my 2nd kitchen (again involving plenty of plumbing, tiling, woodwork etc). As well as numerous other DIY tasks, around the place. I understand this would be a small fortune to pay tradespeople to do. I’ve done it myself, thanks to skills and confidence developed as a result of attending YTA courses, instructed by the excellent tutors Lorry, Dave, and Graham. I also gained a great deal of knowledge surrounded by industry trades people, also cross-training across disciplines. A very helpful perspective. I’ve plenty to learn in maintaining properties, but I think its helpful to get a good grounding in what is a multi-discipline/skill set of tasks. Many thanks to tutors and course colleagues.I recommend to anyone who wants to have a go and do a good job, and some might say, professional.

Thank you Nigel for an excellent 5 star multiple courses YTA review. It’s always lovely to see students put their training and skills to good use following the courses.

YTA reviews

If you would like some more information or would like to discuss any of our training courses available at YTA then please contact the team on 01274682199 or you can visit the training centre with no appointment necessary Monday to Friday 8:30am to 5pm.

 Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

Email: info@ytatraining.com

By

5 star reviews for 2 day plastering & 2 day worktop fitting

Two recent 5 star reviews following the completion of the 2 day plastering course and 2 day worktop fitting course.

Tim Falkner – 2 day plastering skimming course

I did the 2 day skimming course. By the first day had skimmed a wall and ceiling. Dave the instructor was very easy to work with teaching me the right techniques to skim. Highly recommend

Anonymous – 2 day worktop fitting course

I have just recently done the 2 day kitchen worktop course and I must say the guy Laurence who was my tutor was excellent he was looking after me and several joiners all at once . But I came with with what I needed and would highly recommend .

 

2 day plastering and worktop fitting course reviews
2 day plastering and worktop fitting course reviews

 

Course Descriptions:

The 2 day Plastering Course is £180 including vat and available most weeks on any 2 consecutive days. It will be 2 days of solid graft with 100% focus on achieving a smooth finish plastered wall. There’ll be no business start up or peripherals just all day mixing and plastering.

The aim of the 2 day worktop course will be to fit a worktop professionally. The course is £250 and you will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

  • You will use tools such as:
  • Router
  • Worktop Jig
  • Circular saw
  • Jigsaw
  • Square
  • Clamps
  • And other joiners tools to create a professional finish.

You will use professional kitchen fitting tools form jig saws, circular saws and routers. You will be shown every aspect of setting up each tool along with handy tips along the way on how to use the tools for different materials.

 

To book on the next available 2 day plastering course or 2 day worktop course you can either check the available dates on the website or call the centre on 01274682199 to book. YTA is based in Bradford, West Yorkshire and is not too far from Leeds. We are ideally located  near to the M62 motorway Junction 26.

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, BD4 9NW, West Yorkshire

Tel: 01274682199

By

Carpentry & Joinery course review at YTA – Philip Porter

”I would definitely recommend” is what Philip Porter had to say following the completion of the 10 day carpentry and joinery course. Please see below the carpentry and joinery course review at YTA.

I attended the 10 day joinery course in October 19. The course was well presented with all the materials and tools available. Lawrence, the teacher was always there for you and as the classes were small he could spend plenty of time with each student. He explained and demonstrated clearly and you could tell he was a master craftsman. There was tea, coffee and biscuits available all day. I feel confident taking my skills out on to site now. I would definitely recommend and I’ll hopefully be doing other courses in time.

Thank you for such a great review Philip of your time at YTA whilst completing the 10 day carpentry and joinery course. Much appreciated.

Thanks again.
From the YTA Team

 

YTA Carpentry & Joinery course review by Philip Porter - Oct 19
YTA Carpentry & Joinery course review by Philip Porter – Oct 19

To read more reviews please follow this LINK.

The 10 day intensive carpentry and joinery course is ideal if you are wanting to start a career in carpentry & joinery and eventually move on to gain your NVQ level 2 in Site Carpentry. No previous experience in carpentry is necessary.

Throughout the course you will cover many aspects of carpentry and joinery including:

A brief course overview of topics covered in the 10 days:

  • Build a stud partition wall with a doorway
  • Hang a door including fitting of locks
  • Fitting of skirting and moldings with external and internal corners
  • Scribing joints to fit moldings and skirting
  • Site carpentry operations included in second fixings
  • Resources required to fix moldings
  • Fixing moldings
  • Terms used in partitioning
  • Resources required to carry out partitioning
  • Produce and assemble studwork partition
  • Variety of tools used and explained in carpentry and joinery

To book the course we require a £200 deposit. The balance of £700 is then due on the first day of your course.

10 day Intensive Carpentry and Joinery Course £900 inc vat.

For an additional £300 (which can be decided on your third day of the course) you can upgrade to the NOCN Cskills Level 1 Certificate in Carpentry & Joinery.

 

For more information please contact the YTA Team on 01274682199. We are open form Monday to Friday 8:30am to 5pm. Courses are running every week.

YTA Training And Assessment Ltd, Unit 12a Factory St, Bradford, BD4 9NW

By

Kitchen worktop course review

Another great review following the completion of the kitchen worktop course.

Really great little course. Gave me the confidence and built on my existing skills. Just what I needed.

Thank you for the 5 star review Chris. Very much appreciated.

The aim of the 2 day worktop course will be to fit a worktop professionally. You will use a router and worktop jig to create the worktop ‘masons mitre’ fitment into a corner area. You will also cut out for a kitchen sink and fit the kitchen sink.

To book on the next available worktop course you can either check the available dates on the website or call the centre on 01274682199 to book.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

By

YTA 1 day Plumbing Course Review

A new 5 star recent review following the completion of the YTA 1 day plumbing course.

I really enjoyed my day plumbing! I went into it with a general fear of plumbing, but I couldn’t believe how much we learnt – working in copper, plastic, solder. The tuition was brilliant – structured, approachable and informative. I’m going to try to book on for more!

Many thanks for the prompt review following the completion of the 1 day plumbing course today Lindsay. Another 5 star YTA review! Very much appreciated. I’m glad you enjoyed the course and we look forward to seeing you on the more courses.

During the 1 day plumbing taster course you will cover the below topics:

  • Use compression joints, end feed (soldering joints) and pipe bending techniques.
  • Work with copper and plastic pipe
  • Fit kitchen sink taps and waste
  • Plumb in a kitchen sink and test up to full working pressure

The 1 day plumbing taster course can be suited to your requirements, if you would just like to ‘have a go’ at plumbing and see how you get on then we can devise a taster day. You can plumb in a kitchen sink or work with pipework and use professional tools and equipment. Spend a day at YTA on the 1 day plumbing taster course and get to grips with learning basic pipefitting skills to plumbing in a small project such as a radiator or a kitchen sink.

To book on the next available 1 day plumbing course at YTA please call the centre on 01274682199.

 

YTA Training and Assessment Ltd

Unit 12a Factory Street, Dudley Hill, Bradford, West Yorkshire

Tel: 01274682199

 

 

Error: Contact form not found.